How do I replace the zazen Shower Filter Cartridge in my Handset or Raindrop Shower Filter?Updated a month ago

Replacing the filter cartridge in either a zazen Handset Shower Filter, or zazen Raindrop Shower Filter is easy! Just follow the simple steps below depending on which shower filter you have, or watch the video!

Instructions for replacing the filter cartridge on a Handset Shower Filter (the shower with the hose attached):

1. Simply unscrew the head at the top of the Shower Filter anti-clockwise. Remove the existing cartridge – to do this gently push the cartridge to the side and it should lift out of place.
2. Remove the stickers from the top and bottom of the new filter cartridge and place it inside and lock it into place. Screw the head of the Shower Filter back on tightly (clockwise) until it is secure.
3. Run water through the  Shower Filter for 30 seconds to flush it and it is ready to use.
4. You can recycle the old Shower Filter Cartridge as it is 100% recyclable.

Instructions for replacing the filter cartridge on a Raindrop Shower Filter:
  Note: you will need a screwdriver to disassemble it.

1. Unscrew the 6 screws in the holes evenly spaced around the showerhead using a screwdriver.
2. Remove the existing cartridge – to do this gently push the cartridge to the side and it should lift out of place. Remove the stickers from the top and bottom of the new filter cartridge and put it into position.
3. Ensure the black seal (already in the showerhead) is in place and gently secure the front and back of the showerhead together.
4. The front piece of the showerhead will lock into place against the back piece of the showerhead. When you feel this lock, the screw holes are perfectly aligned. Now screw the 6 screws back together using the screwdriver.
5. Run water through the Raindrop Shower Filter for 30 seconds to flush it and it is ready to use.
6. You can recycle the old Shower Filter Cartridge as it is 100% recyclable.