How do I install the zazen Infinity Shower Filter?Updated a month ago

Installing the zazen Infinity Shower Filter is a simple do-it-yourself job.

In some instances, you may need a wrench and/or pliers, especially if you have a very old shower head that has been in place for a long time and may be difficult to remove.

If you’re not comfortable installing it yourself, ask a handy friend or a professional to assist with the installation.

Instaling the Infinity Shower Filter

Just follow these simple steps.

Step 1

• Remove the Infinity Shower Filter from the box
• Remove the protective plugs from your Infinity Shower Filter - the white plug at the top of the filter unscrews, the pale blue plug at the bottom pulls out.

Step 2

• Each filter has a sure-seal washer in the top that ensures a watertight seal without the need for plumbers’ tape.
• Simply screw and hand tighten.

Step 3

IMPORTANT: Ensure the water supply to your shower is turned off before starting.

Installing your zazen Infinity Shower Filter to a Shower Hose Connection

1. Unscrew the Shower Hose where it connects to the water inlet valve using your hands to twist the hose connection counterclockwise to loosen it.
   If it’s tight, you may need to use a wrench with gentle pressure to avoid damaging the fittings.
2. Screw the Infinity Shower Filter onto the inlet valve by turning it clockwise until securely tightened. Do not over-tighten, hand-tightening is sufficient.
3. Reconnect the Shower Hose by attaching it to the outlet (bottom) of the Infinity Shower Filter by twisting it clockwise. Tighten firmly by hand.
4. Test for leaks around the connections by turning the water supply back on and run the shower. If you notice any, tighten slightly further.

Installing your zazen Infinity Shower Filter to a Wall Pipe with a Shower Head

1. Unscrew the Shower Head where it connects to the shower wall pipe using your hands to twist the hose connection counterclockwise to loosen it.
   If it’s tight, you may need to use a wrench with gentle pressure to avoid damaging the fittings.
2. Screw the Infinity Shower Filter onto the wall pipe by turning it clockwise until securely tightened. Do not over-tighten, hand-tightening is sufficient.
3. Reconnect the Shower Head by attaching it to the outlet (bottom) of the Infinity Shower Filter by twisting it clockwise. Tighten firmly by hand.
4. Test for leaks around the connections by turning the water supply back on and run the shower. If you notice any, tighten slightly further.

Step 4

You're all set to enjoy refreshing, healthy shower water!